Plugin Alliance Kiive Audio Tape Face v1.0.1 macOS
Tape Face Realistic tape emulation with extra character and digital only features. All the vibe of real analog tape. and more Some of the most common emulations of high end tape machines on the market can be a bit too subtle at times, leaving one to ask "is this thing on"? That's why Kiive Audio's Tape Face is modeled after one of the most characterful professional tape machines ever made, adding a welcome dose of analog charm to digital recordings.
All the vibe of real analog tape. and more
Some of the most common emulations of high end tape machines on the market can be a bit too subtle at times, leaving one to ask "is this thing on"? That's why Kiive Audio's Tape Face is modeled after one of the most characterful professional tape machines ever made, adding a welcome dose of analog charm to digital recordings.
Three modes: from tasteful, to subtle, to seriously tapey
In Mode I, Tape Face provides an exacting emulation of an Irish-made tape machine known for its pleasantly colored tone. In this default setting, it offers an even greater sonic imprint than some of the cleaner machines made in Switzerland and the U.S. In Mode II, the emulation becomes significantly more transparent, for when a gentler touch is in order. And for Lo-Fi enthusiasts, Mode III dials in extra grit, saturation and top-end softening for more extreme analog degradation.
More than just emulation
The Tape Face offers features not found on the original analog tape machines. It adds extra tape speeds for a greater number of frequency curves and head bumps.
Want that head bump to be even more significant? Try the "Low Boost" feature to restore lose bottom end. Want more tape color and compression without increasing the gain? Just turn up the saturation knob.
Want some real magic? The "Bias"'switch fattens and saturates your low mids while keeping them controlled with frequency dependent tape compression. Tape Face even allows you to add stereo width or see just how much tape compression is being applied.
Try it on EVERYTHING
Tape Face sounds great just about everywhere. For a hint of subtle tape saturation, try Mode II on mix bus or on all your tracks, in 30 or 15ips.
Fatten up thin guitars in Mode I, and then try flipping on the bias switch and running it in 15 or 7.5 ips for an even richer sound. Bring parallel drum buses and loops to life by engaging Mode III-And don't be shy with that saturation knob!
Give any of these approaches a try on vocals, bass, high percussion and synths to dial in your preferred amount of color.
FEATURES
- Analog-modeled emulation of a classic Irish tape machine
- CPU-friendly oversampling allows you to throw it on every track to emulate recording through a physical tape machine
Three modes
(I) - Perfect for getting that pumpy tape sound while adding minimal distortion. This setting is best used for mix bus or drums with heavy transients that need taming.
(II) - Emulates a near perfectly calibrated tape machine with silky smooth high end, low end bump and a very usable tape compression when the input is driven. Perfect for mix bus or any finishing touches.
(III) - Made with LoFi producers in mind. Dark and gritty tape saturation with heavy Gain reduction and harmonics when pushed.
- Additional features include
- Bias: Make your low mids fat, gritty, and forward while keeping them well-controlled
- Tape speed: Increase the amount of high end rolloff and the frequency of the head bump by going down in speed
- GR metering: Visualize how much take compression you're applying
- Stereo width: Spread out your sound
- Low boost: Bring back lows lost to saturation
- Saturation: Increase tape compression and harmonic coloration without messing up your gain staging
Intel only
Whats new in this version
Official site does not provide any info about changes in this version.
System Requirements
Minimum System Requirements
•1 GHz Intel Dual Core Processor or AMD equivalent (PC)
•4GB of RAM
•Mac OS X 10.7 or higher, 10.14 or higher recommended
•Windows 7 & Above
•Screen res: 1024 x 768 or higher
•64 bit DAW support only
Supported Plugin Formats
•Mac 64bit / M1 Native: VST3, AU, AAX
•Windows 64bit: VST3, AAX
Plugin Alliance Kiive Audio Tape Face v1.0.1 macOS (181.49 MB)
NitroFlare Link(s)
RapidGator Link(s)
Tape Face Realistic tape emulation with extra character and digital only features. All the vibe of real analog tape. and more Some of the most common emulations of high end tape machines on the market can be a bit too subtle at times, leaving one to ask "is this thing on"? That's why Kiive Audio's Tape Face is modeled after one of the most characterful professional tape machines ever made, adding a welcome dose of analog charm to digital recordings.
All the vibe of real analog tape. and more
Some of the most common emulations of high end tape machines on the market can be a bit too subtle at times, leaving one to ask "is this thing on"? That's why Kiive Audio's Tape Face is modeled after one of the most characterful professional tape machines ever made, adding a welcome dose of analog charm to digital recordings.
Three modes: from tasteful, to subtle, to seriously tapey
In Mode I, Tape Face provides an exacting emulation of an Irish-made tape machine known for its pleasantly colored tone. In this default setting, it offers an even greater sonic imprint than some of the cleaner machines made in Switzerland and the U.S. In Mode II, the emulation becomes significantly more transparent, for when a gentler touch is in order. And for Lo-Fi enthusiasts, Mode III dials in extra grit, saturation and top-end softening for more extreme analog degradation.
More than just emulation
The Tape Face offers features not found on the original analog tape machines. It adds extra tape speeds for a greater number of frequency curves and head bumps.
Want that head bump to be even more significant? Try the "Low Boost" feature to restore lose bottom end. Want more tape color and compression without increasing the gain? Just turn up the saturation knob.
Want some real magic? The "Bias"'switch fattens and saturates your low mids while keeping them controlled with frequency dependent tape compression. Tape Face even allows you to add stereo width or see just how much tape compression is being applied.
Try it on EVERYTHING
Tape Face sounds great just about everywhere. For a hint of subtle tape saturation, try Mode II on mix bus or on all your tracks, in 30 or 15ips.
Fatten up thin guitars in Mode I, and then try flipping on the bias switch and running it in 15 or 7.5 ips for an even richer sound. Bring parallel drum buses and loops to life by engaging Mode III-And don't be shy with that saturation knob!
Give any of these approaches a try on vocals, bass, high percussion and synths to dial in your preferred amount of color.
FEATURES
- Analog-modeled emulation of a classic Irish tape machine
- CPU-friendly oversampling allows you to throw it on every track to emulate recording through a physical tape machine
Three modes
(I) - Perfect for getting that pumpy tape sound while adding minimal distortion. This setting is best used for mix bus or drums with heavy transients that need taming.
(II) - Emulates a near perfectly calibrated tape machine with silky smooth high end, low end bump and a very usable tape compression when the input is driven. Perfect for mix bus or any finishing touches.
(III) - Made with LoFi producers in mind. Dark and gritty tape saturation with heavy Gain reduction and harmonics when pushed.
- Additional features include
- Bias: Make your low mids fat, gritty, and forward while keeping them well-controlled
- Tape speed: Increase the amount of high end rolloff and the frequency of the head bump by going down in speed
- GR metering: Visualize how much take compression you're applying
- Stereo width: Spread out your sound
- Low boost: Bring back lows lost to saturation
- Saturation: Increase tape compression and harmonic coloration without messing up your gain staging
Intel only
Whats new in this version
Official site does not provide any info about changes in this version.
System Requirements
Minimum System Requirements
•1 GHz Intel Dual Core Processor or AMD equivalent (PC)
•4GB of RAM
•Mac OS X 10.7 or higher, 10.14 or higher recommended
•Windows 7 & Above
•Screen res: 1024 x 768 or higher
•64 bit DAW support only
Supported Plugin Formats
•Mac 64bit / M1 Native: VST3, AU, AAX
•Windows 64bit: VST3, AAX
Code:
https://www.plugin-alliance.comPlugin Alliance Kiive Audio Tape Face v1.0.1 macOS (181.49 MB)
NitroFlare Link(s)
Code:
https://nitroflare.com/view/3D42D3B7FEBC4F9/Plugin_Alliance_Kiive_Audio_Tape_Face_v1.0.1_macOS.rar
Code:
https://rapidgator.net/file/c1ca3c93cf6d81cefb7a24632543ac73/Plugin_Alliance_Kiive_Audio_Tape_Face_v1.0.1_macOS.rar